0086-755-21006895
No. 1, Zone B, Floor 4th, Building 1, Puhua Science & Technology Park, Industrial Park Road, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China (Mainland)
slim led driver module 12v 24v 40w switch mode led power supply with size 165*50*16.5mm
| MODEL | OTM-SS40-12 | |
| OUTPUT | DC VOLTAGE | 12V |
| RATED CURRENT | 3.3A | |
| CURRENT RANGE | 0-3.3A | |
| RATED POWER | 40W | |
| RIPPLE&NOISE(max) | <300mV | |
| VOLTAGE TOLERANCE | ±0.5V | |
| INPUT | VOLTAGE RANGE | 85-265VAC |
| FREQUENCY RANGE | 47-63Hz | |
| POWER FACTOR(Typ.) | PF>0.6 | |
| Flicker/Non flicker | Non flicker | |
| AC CURRENT(Typ.) | 0.06A/220VAC | |
| PROTECTION | Short circuit |
Protection type:Hiccpe mode,recovers automatically after condition is removed |
| Overload | 100-180% | |
| ENVIRONMENT | WORKING TEMP. | -10~+40℃ (Refer to output load derating curve) |
| STORAGE TEMP | -40~+80℃ | |
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP20 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:3.75KVAC | |
| EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3 | |
| EN61547 | ||
| NOTE |
1.All parameters NOT specially mentioned are measured at 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pairwire terminated with a 0.1uf&47uf parallel capacitor.3.Tolerance:includes set up tolerance, line regulation and load regulation. |
|
